SAE J1630 Driver or Passenger Airbag Module Deployment Test Procedure
时间:2024-05-16 16:51:52 来源: 标准资料网 作者：标准资料网 阅读：8554
Product Code:SAE J1630
Title:Driver or Passenger Airbag Module Deployment Test Procedure
Issuing Committee:Inflatable Restraints Committee
Scope:This SAE Recommended Practice describes a method to be used for the static deployment of airbag module assemblies. The results obtained from the deployment tests will be used to verify compliance with design requirements and/or specifications. The intent of this procedure is to describe recommended test methods to evaluate performance characteristics of driver airbag modules, passenger airbag modules, or other airbag modules (e.g., side airbags (door or seat mounted), roof rail airbags, knee bolster airbags, etc.). Performance limits or acceptance criteria are not established as they are typically defined based on specific vehicle design requirements. It is intended to be a general procedure for repetitive testing and suggests only general guidelines for the safe conduct of tests and reliable data correlation.
【英文标准名称】:StandardSpecificationforPigTin
【原文标准名称】:锡锭的标准规范
【标准号】:ASTMB339-2000
【标准状态】:现行
【国别】:美国
【发布日期】:2000
【实施或试行日期】:
【发布单位】:美国材料与试验协会(ASTM)
【起草单位】:ASTM
【标准类型】:()
【标准水平】:()
【中文主题词】:规范(验收);锡
【英文主题词】:tin;specification(approval)
【摘要】:
【中国标准分类号】:H62
【国际标准分类号】:77_120_60
【页数】:4P;A4
【正文语种】:英语
Product Code:SAE J2931/3
Title:PLC Communication for Plug-in Electric Vehicles
Issuing Committee:Hybrid - Ev Committee
Scope: This SAE Recommended Practice J2931/3 establishes the requirements for physical layer communications using Power Line Carrier (PLC) between Plug-In Vehicles (PEV) and the EVSE. This also enables the onward communications via an EVSE bridging device to the utility smart meter or Home Area Network (HAN). This is known as Orthogonal frequency-division multiplexing (OFDM) and is Power Line Carrier (PLC) that can be transmitted using either the J1772鈩?Control Pilot circuit or the mains (AC or DC power circuits).
Rationale: This SAE Recommended Practice J2931/3 establishes the requirements for physical layer communications using Power Line Carrier (PLC) between Plug-In Vehicles (PEV) and the EVSE. This also enables the onward communications via an EVSE bridging device to the utility smart meter or Home Area Network (HAN). This is known as Orthogonal frequency-division multiplexing (OFDM) and is Power Line Carrier (PLC) that can be transmitted using either the J1772鈩?Control Pilot circuit or the mains (AC or DC power circuits).